PAT -NO:
JP356074749A
DOCUMENT- IDENTIFIER :
JP 56074749 A
TITLE :
CONTROLLING DEVICE
MICROPROGRAM
KWIC
Abstract Text - FPAR (2) :
CONSTITUTION: As for the microprogram, the
micro- instruction is read out to
the micro- instruction register 3 from the
control memory by the (n) bit of the
address stored in the micro- instruction
address register 2 . Also at the same
time, the decode mode is read out to the
decode mode register 6 from the decode
mode memory by use of the high rank (a) bit of
the address stored in the
register 2 . The decoder 4 decodes the
micro- instruction stored in the
micro-instruction register 3, and modifies the
decode output prescribed by the
decode mode which has been stored in the
register 6.
02/19/2004, east Version: 1.4.1
PAT -NO:
JP356074749A
DOCUMENT- IDENTIFIER: JP 56074749 A
INVENTOR- INFORMATION :
NAME
WAKITA, HIROYUKI
ASSIGNEE- INFORMATION :
NAME
COUNTRY
NEC CORP
N/A
APPL-NO: JP54152664
APPL-DATE: November 26, 1979
INT-CL (IPC) : G06F009/22
ABSTRACT :
TITLE :
CONTROLLING DEVICE
MICROPROGRAM
PUBN-DATE:
June 20, 1981
02/19/2004, EAST Version: 1.4.1
Patent Application Publication Apr. 4, 2002 Sheet 3 of 8 US 2002/0040380 Al
( Start of executing control unit operation)
,t1
Request number issuing unit to issue
number
I
Operation of number issuing unit ]
,t3
Register unique number of execution
request issued number,
Type of service application type of
requested appfication,
Executed final step number *- 0,
in sequence registration table by using
issued number
i
Acquire corresponding final
step number from
sequence registration table
and set in procnum
t4
procnum +- 0
,t6
Look up processing element definition
table to detect processing element
having corresponding step number
proc_num+ 1, and request process
executing unit to execute by (fata
1
.19
Look up recovery
processing element
definition table to detect
recovery processing
element having
corresponding step number
procnum + 1, and request
process executing unit to
execute
Add 1 to corresponcfing fmal step
number in sequence registration table
-> set "completed" in status if process
is completed
Operation of process
executing unit
,t10
Output result to input/output unit |
3
C End of executing control unit operation ) f I ft Q
Patent Application Publication Apr. 4, 2002 Sheet 4 f8 US 2002/0040380 Al
(start of number issuing unit operation)
,u1
Add 1 to maximum value of unique numbers
registered in sequence registration table,
and output to executing control unit
Q End of number issuing unit operation)
FIG.4
Start of input/output unit operatfori^
,v1
Output input contents (e.&, type of service
application and data) to executing control
unit.
rep «- destination of response to service
application
Operation of executing control unit
✓v2
Output response (e.g., execution result) from
executing control unit to service application
rep
Q End of input/i
output unit operation
FIG.5